A dump truck load of gravel typically costs between $300 and $1,000, with most homeowners spending around $450 to $600 for a standard 10–15 ton tandem load. Costs depend heavily on the gravel type, distance from the quarry, and local delivery fees, which can add $150+ to the material price.

What is the cost of a dump truck full of gravel?

A standard dump truck load of gravel typically costs between $500 and $1,000 for 10 to 13 tons of material. Single axle trucks (5-7 tons) cost $200-$500, tandem axle trucks (12-15 tons) cost $400-$900, and tri-axle trucks (18-22 tons) cost $600-$1,200.

How much does a load of gravel usually cost?

Quick Answer: A 10-13 ton dump truck load of gravel costs $500-$1,000 on average, with delivery fees adding $50-$200 depending on distance.

How much driveway will 20 tons of gravel cover?

Understanding Size and Coverage

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

How much gravel is in a dump truck load?

Most homeowners and contractors face this same question when estimating delivery costs and project timelines. Standard dump trucks hold 10-12 cubic yards of gravel, while super dumps can carry 14-16 cubic yards. Large articulated and belly dump trucks handle 25-32 cubic yards.

How much does a dump truck load of gravel cost?

How much does a 100 ft gravel driveway cost?

A typical 100-foot by 10-foot driveway requires about 13 tons of gravel at 3 inches deep. With delivered gravel costing $150-$220 per ton and professional installation running $4-$8 per square foot, most homeowners find gravel driveways offer excellent value compared to asphalt or concrete alternatives.

Is 2 inches of gravel enough for a driveway?

No, 2 inches of gravel is generally not enough for a functional driveway, only providing a thin, temporary surface; you need 4 to 6 inches of compacted gravel in layers (base + top) for proper support, drainage, and to prevent vehicles from sinking, especially for regular car traffic. While 2 inches might work for very light foot traffic or as the top layer, it won't build the solid, stable foundation required for vehicles.

What is the lifespan of gravel?

Properly installed and maintained gravel driveways can last 10 to 15 years or more, depending on factors such as drainage, compaction, and usage. Regular replenishment of gravel and occasional grading can help extend the lifespan of gravel driveways and prevent rutting and erosion.

What is the cheapest way to get gravel?

The best and smartest way to get a great deal on good gravel is to go directly to the source. Suppliers who manufacture their own product in a local quarry are the most reliable and will be able to offer the fairest wholesale prices.

Is it cheaper to use gravel or asphalt?

Gravel driveways are typically cheaper than their concrete or asphalt counterparts. However, the exact cost can vary depending on factors such as the type of gravel used, the geographical location, and the complexity of the project.

How many yards of gravel can a 7x14 dump trailer hold?

A 7x14 dump trailer typically has a capacity that ranges from around 3 to 5 cubic yards, depending on its design and construction.

What size gravel is best for drainage?

If you're placing gravel to promote drainage on your property, it should be at least ½” and not any larger than 1½” in diameter. It depends where you're using the gravel too. If you're constructing a French drain, you'll want gravel that's at least 1” and possibly larger.

Is a gravel driveway cheaper than concrete?

If you're in the market for a new driveway, you may want to consider one made of gravel. The national average cost of installing a gravel driveway is $1,500, but you can pay as much as $60,000 or as little as $300. Gravel driveways look great and are much more affordable than traditional concrete or asphalt driveways.

How much gravel for a 20 ft driveway?

Volume Calculations

For example, if you have a driveway that is 20 feet long, 10 feet wide, and 0.5 feet deep (6 inches), the calculation would be: 20 × 10 × 0.5 = 100 cubic feet ÷ 27 = 3.7 cubic yards of gravel.

Can you lay gravel on wet ground?

In wet locations, such as areas prone to heavy rainfall or near bodies of water, it's important to select a gravel that can withstand moisture and provide stability. One of the best options for wet locations is crushed stone.

What is the 10/20/30/40 rule for concrete?

The 10-20-30-40 rule for concrete is a simple guideline for mix proportions by absolute volume: about 10% cement, 20% water and air, 30% fine aggregate (sand), and 40% coarse aggregate (gravel), forming a good starting point for a typical concrete batch, though exact ratios vary with project needs.
 

Do gravel driveways increase property value?

Increases Property Value

Investing in a new or refreshed gravel driveway can contribute to an increase in your property's value. A well-designed driveway enhances the overall appeal of your home, making it more attractive to potential buyers.

How much will a dump truck of gravel cover?

A dump truck load of gravel doesn't go a specific distance; it covers a certain area (square feet) depending on the truck's capacity (tons/yards) and the desired depth (inches), with larger trucks carrying 10-20+ tons, covering significant driveways or large bases, while smaller loads cover smaller patio areas or specific spots, with depth being the key factor for coverage area.
 

---